Skip to content
Cleaning guide

Commercial cladding cleaning: what it involves and when it is worth it

Commercial cladding should be cleaned with low pressure and a cleaning solution suited to the coating, at least once a year on most buildings.

Published 25 October 2026 · 7 minute read

The short answer

Commercial cladding should be cleaned with low pressure and a cleaning solution suited to the coating, at least once a year on most buildings. A proper clean covers the walls, rooflights, gutters and flashings, and it shows you whether the cladding only needs washing or has faded far enough to need a respray.

Why cladding needs cleaning at all

Metal cladding on a factory or warehouse picks up dirt from every direction. Traffic film from the yard, dust from nearby works, salt carried on the wind near the coast, bird droppings, leaves in the gutters and green algae on the shaded north side all build up year after year. Left alone, that layer holds moisture against the coating, feeds algae and lichen, and hides the early signs of corrosion at sheet laps and cut edges.

There is also a contractual reason. Coil coating manufacturers expect the building owner to look after the finish. Tata Steel’s published performance guarantee for its Colorcoat products, for example, asks the owner to inspect the cladding every year and clean off surface deposits such as salt, dust and leaves (Tata Steel guarantee terms). That document is the Netherlands version, and terms differ between products and countries, so check the guarantee that came with your own building. The point holds for most systems: a building that has never been cleaned can be harder to claim on if the coating fails early.

Clean or respray: how to tell

A clean is the right answer when the coating underneath is still sound. After washing, the colour comes back close to the original, the surface feels smooth rather than powdery, and there is no rust showing through.

A respray is the better call when cleaning shows up problems it cannot fix. Three quick checks:

  • Rub a clean, dry hand on a sunny elevation. If it comes away coated in coloured powder, the finish is chalking and has lost its protective top layer.
  • Compare the colour on the sunny side with a sheltered spot such as behind a downpipe. A big difference means the pigment has faded and washing will not bring it back.
  • Look along the bottom edges of the sheets and at the overlaps. Brown staining or bubbling paint there is usually cut edge corrosion, which needs treating before anything else.

Many jobs start as a cleaning enquiry and end with a mix of both: a full clean of the building, cut edge treatment where corrosion has started, and a respray on the one or two elevations that have faded worst. We do cleaning and spraying with the same crew, so you get one survey and one honest recommendation. Our cladding spraying explained guide covers what a respray involves.

How commercial cladding is cleaned

Low pressure. Coil coated steel and aluminium carry a thin factory finish, usually plastisol or PVF2. A high pressure lance held too close can etch that finish, leave streaks and drive water into laps and fixings. The safer method is low pressure washing with a cleaning solution that loosens the dirt chemically, then a thorough rinse. This is often called soft washing.

The right chemicals. Detergents and algae treatments need to suit the coating. Some strong cleaners and biocides can mark or soften a finish, so we check the product against the cladding manufacturer’s guidance before it goes on the building. Run off is controlled so it stays out of surface water drains.

Access. Most cladding cleaning is done from a mobile elevating work platform such as a cherry picker or scissor lift, and our crew is IPAF trained for that work. Rooflights and roof sheets need separate planning because many rooflights are fragile and cannot be walked on, so roof work is done from safe access with the fragile areas protected.

What a commercial clean should include

Ask any contractor exactly what is in the price. A full external clean from us normally covers:

  • All cladding elevations, top to bottom, including soffits and canopies
  • Fascias, flashings and trims
  • Roller shutters and personnel doors
  • Gutters and outlets cleared so water drains properly, part of our roof maintenance
  • Rooflights cleaned from safe access, which also lets more daylight into the building
  • Windows and frames where requested
  • A short written note of anything we spotted along the way, such as corrosion at laps, loose fixings or damaged sheets

How often to clean

Once a year suits most industrial and commercial buildings, and it lines up with the annual inspection most coating guarantees ask for. Some buildings need it more often:

  • Sites near the coast or the Humber, where salt settles on the walls
  • Buildings beside heavy industry or busy roads, where dust and traffic film build up quickly
  • Food and cold storage sites where appearance matters to customers and auditors
  • Elevations shaded by trees, where algae grows fastest

A building that has gone several years without cleaning will usually need a deeper first clean, and then lighter annual visits after that.

Can you stay open while the cladding is cleaned?

Yes. We plan the work in sections so loading bays, entrances and fire exits stay usable, and we move around your deliveries. Where daytime working would get in the way, evenings and weekends are possible. Vehicles parked close to the wall are the main thing to plan for, so we agree with you in advance which areas need clearing and when. Our guide to staying open during the work has more.

What commercial cladding cleaning costs

Cleaning is priced on the area of cladding, the access needed, how dirty the building is and whether rooflights and gutters are included. You get a fixed written price after a free survey, and the cost guide compares cleaning with a respray.

What to ask a cladding cleaning contractor

These questions sort the specialists from the jet wash vans.

  • What pressure and which cleaning products will you use, and are they suitable for my coating?
  • Are you insured for work at height, and are the operatives IPAF trained?
  • Is the crew directly employed or subcontracted?
  • What exactly is included: gutters, rooflights, shutters, windows?
  • How will you protect vehicles, stock and neighbours, and where does the run off go?
  • Will you tell me if you find corrosion or damage?
Quick questions

Once a year for most buildings, which also matches the annual inspection many coating guarantees ask for. Sites near the coast, heavy industry or busy roads may need cleaning more often.

Want a straight answer about your building?

Send us a few details and a photo. We will come out, look at it properly and give you a written price.

Get a Free Quoteor WhatsApp us a photo