Skip to content
Areas we cover · Scunthorpe

Cladding spraying in Scunthorpe.

Faded and dust stained units on the north side of town, cleaned, treated and resprayed by a crew eight miles down the road.

Scunthorpe is a working town, and its buildings show it. Most of the metal clad units here sit on the north side of town: Foxhills Industrial Estate off Normanby Road and Park Farm Road, the smaller Mercia Way estate, and Normanby Enterprise Park next door. They take the same weather as everywhere else in North Lincolnshire, plus the dust that comes with living alongside heavy industry.

We are based in Brigg, about 8 miles east along the A18 and M180. That means we can survey a Scunthorpe building at short notice and have the crew on site early without a long drive eating into the day.

What industrial dust does to cladding

Airborne dust settles on roofs, gutters and the top edges of wall sheets. On its own it looks like grime. Left there through a wet winter, it holds moisture against the coating, and on older sheets that shows up as orange staining and rust spotting that a jet wash will not shift.

The other common problem is cut edge corrosion. The bare steel at the cut end of each sheet is the weak point on any profiled roof or wall, and once the coating lifts there the rust creeps back along the sheet. On many units round Foxhills the panels themselves are sound, while the laps, the gutter edges and the bottom of the wall sheets need treating before any paint goes on. Roof sheets suffer the same way.

Survey first, then a clear plan

Every job starts with a free site survey. We walk each elevation, check the coating with a simple adhesion test, look at the laps and fixings, and photograph anything that needs attention. You then get a written quote that says what we will clean, what we will treat, what colour goes on and how many days we expect to be there.

On the job the order is the same each time. We give the cladding a proper clean, treat any corrosion, mask everything that is not being sprayed, then apply the coating system for a cladding respray in your chosen RAL or BS colour. Most commercial jobs take three to seven days on site. If you are weighing up new sheets instead, our respray or replace guide sets out the difference.

Staying open while we work

Most Scunthorpe units are working sites with wagons coming and going all day. We plan access around your yard, keep loading doors clear where you need them, and spray one elevation at a time so the rest of the building carries on as normal. If daytime work would get in the way, we can work evenings or weekends.

Our crew is directly employed, CHAS and SafeContractor accredited, and trained to IPAF, CSCS and SMSTS, which matters on estates where the site rules are strict.

Questions from Scunthorpe.

What people in the area ask us before they book a survey.

Usually, yes. Surface staining is cleaned off and any rust is treated before the coating goes on. If a sheet is too far gone to hold paint, we will tell you at the survey and quote to replace that panel instead.

Got a building in Scunthorpe?

Tell us where it is and what it looks like now. We will come out, look at it properly and give you a written price.

Get a Free Quoteor WhatsApp us a photo