Published 31 October 2026 · 5 minute read
The short answer
A roof coating is a protective system sprayed over a whole profiled metal roof once corrosion, leaks and damaged sheets have been dealt with. It suits roofs where the sheets are still sound but the original coating is failing. Roof coating systems carry manufacturer warranties of fifteen years and up, with premium options up to twenty five years.
What a roof coating does
A profiled metal roof fails from the edges inwards. The factory coating on the sheets breaks down in the sun, the cut edges at the laps rust, and water starts to find its way in at the laps and fixings. Most of the time the steel across the middle of each sheet is still sound when the problems start.
A roof coating system is sprayed over the whole surface once those weak points have been repaired. It seals the treated edges and laps, protects the rest of each sheet from the weather and brings the colour back at the same time. Done properly it extends the life of the roof by years, for a fraction of the cost of a new one.
Is your roof a candidate?
A survey decides this, but you can get a good idea beforehand. A roof is usually worth coating when:
- The sheets are sound, with no holes or rust right through
- Corrosion is at the laps, eaves and edges, and has not spread across whole sheets
- The original coating is faded, chalking or flaking
- Leaks come from laps, fixings or gutters, which can be repaired, and the sheets themselves have not failed
Coating is the wrong answer when sheets are holed or rusted through across large areas, when composite roof panels are delaminating, or when the roof is due to come off anyway. In those cases the failed sheets need replacing, and we install roofing as well as coat it. Often the answer is a mix: replace a few failed sheets and coat the whole roof so old and new are protected alike.
What has to happen before any coating goes on
A coating sprayed over rust, dirt or a leak fails early, however good the product. So the coating is the last stage of the job, and most of the work happens before it.
- Inspect: we survey the roof, gutters and laps, photograph the problem areas and tell you what is urgent
- Treat: corroded edges are stripped back to sound metal, treated and sealed. Our cut edge corrosion guide explains why this matters
- Repair: leaks, failed laps, damaged sheets and worn gutters are repaired or replaced. See our guide to leaking gutters on industrial units
- Clean: the roof is cleaned so the coating bonds to the sheet and not to the dirt on it
- Coat: the protective system is sprayed over the whole surface
Rooflights and safety on the roof
Many rooflights on industrial buildings are fragile and cannot take a person’s weight. Roof work is planned from safe access with the fragile areas protected, by a crew trained to IPAF, CSCS and SMSTS, and CladCoat is CHAS and SafeContractor accredited. Rooflights can be cleaned while the access is up, which also lets more daylight into the building, and damaged rooflights can be replaced as part of the job.
Vents, extract fans and any plant on the roof are masked or worked around, and we agree with you in advance how the crew will work near anything that has to keep running.
Weather and the time of year
Coatings have rules about when they can go on. The roof must be dry, the air and the steel must be above the coating manufacturer’s minimum temperature, and the steel must sit far enough above the dew point that condensation will not form under the coating. Spring to autumn is the easiest time, and winter work is planned around dry, milder spells. We build weather allowance into the timescale.
If you want the work done in the summer, it is worth arranging the survey in late winter or early spring.
Staying open underneath
Roof coating goes on above you while the building stays open. The crew works from the outside, so production, storage and offices carry on as normal. We agree access routes, parking for the access equipment and any areas of the yard to keep clear, and plan around your deliveries. Our guide to staying open during a respray covers how that planning works.
Warranty and cost
Roof coating systems carry manufacturer warranties of fifteen years and up, and premium systems go up to twenty five years. The system for your roof, and the exact warranty, are confirmed in writing with your quote. Our warranty guide explains who stands behind the cover.
A roof is priced from a free survey, because the area, the amount of corrosion treatment and repair, the access and the number of rooflights all change the price. Treating the edges and coating the roof costs a fraction of a new roof.





