Published 31 October 2026 · 4 minute read
The short answer
A cladding respray can be done in any RAL or BS colour, so you can go back to the original shade, match a brand colour or choose something new. Pick the reference from a printed colour card, because screens show colour unreliably, look at it against the building in daylight, and decide early whether doors and trims match or contrast.
RAL and BS: what the references mean
Cladding, shutters and trims are specified by colour reference, so everyone involved is talking about exactly the same shade. RAL references are four digit numbers. BS references come from British Standard colour ranges and are written as a mix of numbers and letters. Factory coated cladding is also often sold under the manufacturer’s own colour name, and that name may be in the building’s handover or guarantee documents.
We spray to any RAL or BS reference. Once you have the reference, the colour that goes on the building is the colour you asked for.
Going back to the original colour
Respraying in the original shade is the simplest choice, and the right one when you are refreshing a building, respraying one elevation or adding an extension that has to match. The catch is that faded cladding no longer shows its original colour. A sunny wall can be several shades paler than it started.
To see the true colour, look at a sheltered spot such as behind a downpipe, under a canopy or behind a sign that has just come down. The survey matches the colour from there, or from the original reference if you have it. Where an extension or a few new sheets have to sit beside old cladding, spraying the whole elevation afterwards makes old and new read as one.
Matching a brand colour
A respray is a straightforward way to bring a building into a new brand colour, or to take it out of a previous occupier’s. Ask whoever looks after your brand for the RAL or BS reference in the brand guidelines. If they only have a print or screen colour, agree a RAL or BS reference from a physical sample before the job is booked. Signage, logos and lights are masked during spraying, so a new sign can go straight onto the finished cladding.
Doors, shutters and trims: match or contrast
Roller shutters, personnel doors, flashings and trims can match the cladding or stand out from it. A contrasting colour on the doors and trims is a simple way to make an entrance easy to find and to give a plain unit some definition. One unit we sprayed in North Lincolnshire came back in jupiter green with its doors and trims in red. Another elevation, faded cladding with worn shutters, came back in a sharp red and grey.
Doing the doors and the cladding in the same visit keeps the colours consistent and the cost of access and masking down. Our guide on whether roller shutters can be resprayed covers the doors in more detail.
Big colour changes
Respraying in the same or a similar shade usually needs less coverage than a big change. Going from a dark colour to a light one can take more coating to hide the old colour fully, and that can show in the price. It is worth knowing before you settle on a dramatic change, and the survey will tell you what your choice means for your building.
Before you commit
A few checks save a lot of second thoughts.
- Look at the colour card outside, against the building, in daylight. Colours look different indoors and on a screen
- Hold it up on more than one elevation, because a wall in full sun and a wall in shade show the same colour differently
- If you lease the building, check whether the lease needs your landlord to agree a colour change
- Some business parks have rules on colours and signage, so check with the estate managers
- Decide on doors, shutters, gutters and trims at the same time as the cladding
Our cladding spraying explained guide covers the rest of the job, from the survey to handover.





