Published 2 November 2026 · 4 minute read
The short answer
Overspray is kept off cars and neighbouring buildings by masking everything near the work, moving vehicles away from the elevation being sprayed, using controlled spray equipment and stopping when the wind is too strong. It is the worry building owners raise first, so protection is planned at the survey, before any coating goes on.
What overspray is
When a coating is sprayed, most of it lands on the surface it is aimed at. A small amount stays in the air as fine droplets, and if nothing stops it, the wind carries it onto whatever is nearby. On a commercial site that can mean cars in the car park, stock in the yard, windows, signage and the unit next door.
Overspray is the thing clients ask about most, and it is far easier to prevent than to clean up afterwards. So the masking and protection a site needs are part of every job we price.
Masking the building
Before any coating goes on, everything on the building that is not being sprayed is covered.
- Windows, frames and glazing
- Signage, lights and cameras
- Vents, extract fans and air intakes
- Brickwork, render and any wall finish that is staying as it is
- The ground along the foot of the wall
- Doors and shutters that are a different colour or are not part of the job
Masking also gives the clean, straight lines where one colour meets another, such as a red door frame against green cladding. Our guide to choosing a cladding colour shows how those contrasts are planned.
Vehicles, stock and the yard
Vehicles are the main thing to plan for. Before the job starts we agree with you where cars and vans will park while each elevation is sprayed, and which areas of the yard need clearing on which days. Anything that cannot be moved, such as racking or stock stored outside, is covered.
On a site with lorries coming and going, the order of the elevations is set around the deliveries so the yard keeps working. Our guide to staying open during a respray explains how that is planned.
Wind and weather
Wind decides more about overspray than anything else. We work to the wind, which means spraying the sides of the building where it blows away from cars and neighbours, and moving round the building as it changes. Spraying stops when the wind is too strong to control. That can cost a few hours on a breezy day, and the timescale allows for it.
Summer brings the best spraying weather, along with fuller car parks and open windows on the units nearby. Tell us at the survey about anything close to the building that matters to you.
Neighbours
On most estates the units sit close together. It helps if you have a word with your neighbours before we start, so they know when each side of the building is being worked on and can park away from it. Where a neighbouring building, fence or car park is close to the elevation being sprayed, it is protected, or the work on that side is timed for when the wind is right.
Shutters and doors
Shutters and doors are sprayed in place, so the surround is masked tightly and the ground beneath is covered. The shutter is then set so every slat can be reached. The photo at the top of this page shows a shutter ready for spraying. Our guide on whether roller shutters can be resprayed covers the rest of that job.
What to ask before work starts
These questions are worth asking any contractor, us included.
- What will be masked, and what do we need to move?
- Where should our vehicles and visitors park on each day?
- Which elevation is being sprayed when?
- Who is our contact on site if we have a concern?





