Skip to content
Repair guide

Dented, holed or loose cladding panels: repair, replace or respray?

A damaged cladding panel can usually be dealt with without new cladding across the whole building.

Published 2 November 2026 · 4 minute read

The short answer

A damaged cladding panel can usually be dealt with without new cladding across the whole building. Loose sheets are refixed and resealed, and holed or rusted through sheets are replaced. Spraying the elevation afterwards makes old and new match. Fixing the damage before winter stops wind and rain getting behind the cladding.

Where cladding gets damaged

Most damage to commercial cladding happens at the bottom of the wall. Forklifts, pallet trucks, reversing lorries and cars catch the sheets at bumper height near loading bays and parking spaces. Higher up, the damage usually comes from the weather: sheet edges lifted by strong wind, flashings worked loose, sealant that has dried and cracked, and fixings that have rusted or backed out over the years.

Rust then does the rest. A scratch or a dent that cracks the coating leaves bare steel open to the rain, and it rusts in the same way as the cut edges at the laps.

Sorting the damage by type

The survey looks at each damaged area and puts it into one of these groups.

  • Shallow dents in a sound sheet: mostly cosmetic, as long as the coating has not cracked
  • Deep creases, splits and holes: the sheet is no longer weathertight and usually needs replacing
  • Loose or missing fixings: rust streaks below a screw are the usual sign, and the fixing is changed and the hole sealed
  • Lifted sheet edges and loose flashings: refixed and resealed before the wind gets further under them
  • Failed sealant around windows, doors and flashings: cut out and renewed
  • Sheets rusted through: replaced, then sprayed so they match the rest of the wall

Replacing a few sheets

Replacing a damaged sheet means taking out the old one and fixing a new sheet of the same profile in its place. We install cladding as well as spray it, so the same crew can do both.

A new sheet rarely matches the faded cladding beside it. It has its full factory colour while the sheets around it have weathered, so it stands out. Spraying the whole elevation after the repair makes old and new read as one wall, and on a building that is due a respray anyway it is often the best value way to deal with the damage.

What a respray will cover

A coating protects a sound surface and brings back its colour. It will not straighten a crease or hold down a loose sheet, and spraying over damage only hides it for a while. So repairs come first. Sheets are replaced or refixed, fixings are changed, sealant is renewed and rust is treated, and the coating then goes over the lot. Our cladding spraying explained guide sets out the order of work.

If the same corner gets hit every year, it may be worth protecting. Bollards and railings at the foot of a wall can be resprayed in a bright colour in the same visit, so drivers see them.

Fixing it before winter

Damage that does little harm in a dry summer causes trouble once the autumn weather arrives. Wind gets under a lifted edge and peels the sheet further back. Rain gets in through a hole or a failed seal and runs down inside the wall, where it can soak insulation and reach stock, and steel that stays wet for months rusts faster.

Early autumn still gives dry days for spraying, so the repairs and the coating that protects them can be done in one visit before the weather turns. Our yearly cladding and roof check shows what to look for as you walk round.

What it costs

Repairs are priced from a free survey. The price depends mainly on how many sheets need replacing or refixing and how easy they are to reach. Spraying the elevation as well adds to it. A few replaced sheets and a respray still cost far less than new cladding across the whole building, and our respray or replace guide explains where the difference comes from.

Quick questions

Yes. The damaged sheet is taken out and a new one fixed in its place. The new sheet will be brighter than the weathered cladding beside it, so spraying the elevation afterwards makes them match.

Want a straight answer about your building?

Send us a few details and a photo. We will come out, look at it properly and give you a written price.

Get a Free Quoteor WhatsApp us a photo